BNDTL - MULTI-PURPOSE GEAR LUBRICANT NO. 140

  • MSDS: BNDTL
  • Manufacturer: AMOCO OIL CO
  • Product Name: MULTI-PURPOSE GEAR LUBRICANT NO. 140
  • National Stock Number: 9150-00-996-7345
Product Identification

Product ID:MULTI-PURPOSE GEAR LUBRICANT NO. 140
MSDS Date:08/15/1986
FSC:9150
NIIN:00-996-7345
MSDS Number: BNDTL

Responsible Party
AMOCO OIL CO
200 EAST RANDOLPH DR
CHICAGO, IL 60601
US

Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)

Info Phone: 312-856-3907

Preparer: STEPHEN A. ELBERT

Cage: 15958

Contractor
AMOCO OIL CO
CHICAGO, IL 60601-6401 US

Telephone: 800 447-8735

Cage: 15958

Ingredients

MINERAL OIL PETROLEUM DISTILLATES HYDROTREATED HEAVY

CAS: 64742-54-7

RTECS: PY8035500


SOLVENT REFINED RESIDUM

CAS: 64742-01-4

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SKIN:NONE EXPECTED FOR SINGLE
SHORT-TERM EXPOSURES. PROLONGED OR REPEATED CONTACT MAY PRODUCE
SOME IRRITATION. EYE:NO SIGNIFICANT IRRITATION EXPECTED.
INGEST:RELATIVELY NON-TOXIC. INHAL:NONE EXPECTED UNDER NORMAL
CONDITIONS OF USE.
Explanation of Carcinogenicity:CAS #64742-54-7 IS LISTED BY THE RTECS
AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD . INHAL:MOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:IF A LA
RGE AMOUNT IS SWALLOWED, INDUCE VOMITING. GET MD.

Fire Fighting

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID STRONG OXIDIZERS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE REQUIRED FOR NORMAL CONDITIONS OF USE.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:0.89 (WATER=1)
Solubility in Water:NEGLIGIBLE (<0.1%)
Appearance and Odor:OILY LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH APPLICABLE
FEDERAL, STATE, OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED
INCINERATION IS RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.